Home
Gallery

Inspection images

Inspection Gallery

Browse common conditions, inspection methods, tools and paired thermal evidence in one collection.

Inspection gallery

Conditions, methods, tools and paired thermal evidence

Select any image to open the viewer.

Inspector using a thermal camera on an accessible wall during a home inspection — Thermal imaging during a BuildInspect home inspectionThermal imaging is included in the confirmed scope for pre-possession flat and leakage or dampness inspections.

Inspector reviewing property inspection tools beside a wall — BuildInspect property inspection tools in useThe agreed method determines which tools are used and what each check can support.

Moisture meter held against an accessible interior wall — Moisture meter check during a BuildInspect inspectionInstrument readings are recorded with the location and inspection context; they are not treated as a concealed-cause diagnosis by themselves.

Open washroom ceiling service panel showing the accessible void above — Accessible washroom ceiling service void inspectionAccessible service openings can add useful context; closed or unsafe voids remain outside the inspected coverage.

Red marker beside an incompletely grouted granite joint in a washroom — Washroom granite joint grouting observationA location-linked photograph helps the homeowner and site team return to the same visible workmanship issue.

Red marker identifying a washroom wall tile acoustic-sounding test location — Washroom tile acoustic-sounding test locationThe photograph records where the acoustic check was performed; a still image cannot reproduce the hollow response heard during sounding.

Inspector using a multimeter at an accessible residential distribution board — Distribution board multimeter checkA documented instrument check provides context for the agreed inspection scope; it is not an electrical safety certificate.

Fine crack running down an interior wall beside a column edge — Interior wall crack and uneven finishVisible cracks and uneven finishes are recorded by location during an inspection.

Hand checking the handle and alignment of a sliding aluminium window — Window operation and alignment checkWindow checks cover operation, hardware, alignment and perimeter sealing.

Inspector using a laser distance meter and spirit level during an apartment inspection — Laser measurement and level checksLaser measurement and level checks support dimensions, slopes and alignment.

Inspector using a rubber mallet for a tile-sounding check — Tile-sounding checkA non-damaging tile-sounding tool helps identify hollow-sounding areas.

Thermal image of a kitchen platform with measurement markers; recorded range 25.3 to 30.3 degrees Celsius — Kitchen platform thermal capture RB00020XThermal capture · recorded range 25.3–30.3°C · centre 28.3°C

Visible-light photograph of the kitchen platform paired with thermal capture RB00020X — Kitchen platform visible companion for RB00020XVisible companion · kitchen platform

Thermal image of a common washroom fitting with measurement markers; recorded range 28.1 to 33.3 degrees Celsius — Common washroom fitting thermal capture RB00010XThermal capture · recorded range 28.1–33.3°C · centre 29.2°C

Visible-light photograph of the common washroom fitting paired with thermal capture RB00010X — Common washroom fitting visible companion for RB00010XVisible companion · common washroom fitting

Your property will have its own scope

Share the decision or concern behind the inspection

We will confirm the relevant areas, access, tools, report and next steps before you book.

Discuss on WhatsApp Or call +91 86188 96770 Request a callback